Hartek News
Cast Film Extrusion: Solving High-Temp Stability
In the R&D of cast film extrusion using novel engineering plastics, maintaining material stability during high-temperature processing remains the central challenge. These advanced materials typically require processing temperatures between 250°C and 400°C,
Twin-screw Hot-melt Extruder Showcased at the Biopharmaceutical and Technical Equipment Exhibition
The 2026 China Xi’an Biopharmaceutical and Technical Equipment Exhibition will be held at the Xi’an International Convention and Exhibition Center from October 15 to 17, 2026. Hartek Technology has confirmed
HTGD Series Hot-Melt Extruder- Solution for Solid Dispersion
At the 8th CMC-CHINA China Pharmaceutical Industry Expo, held from September 4 to 5, 2026, at the Suzhou International Expo Center, Hartek Technology showcased its HTGD series pharmaceutical-grade twin-screw hot-melt
Master Film Formulation with Hartek’s Advanced Film Blowing Extruder
Developing new polymer films for packaging, agriculture, or medical applications requires precise control over the blowing process. The quality of your final film—its clarity, strength, and barrier properties—is directly tied
Accelerate Your Polymer Research with High-Precision Lab Extruders
In the fast-paced world of polymer science, the speed and accuracy of your research and development can make or break a project. For university labs, research institutes, and corporate R&D
Laboratory twin-screw extrusion granulator shipped to Uzbekistan
A twin-screw extrusion and pelletizing machine line from Hartek Technology has successfully completed factory commissioning and packing, and has officially been shipped to Uzbekistan. This marks the first entry of
Two-roll Open Mill Trial Run: PVC Compounding
In PVC formulation development, the uniformity of the mixing process directly impacts product performance. Issues such as poor plasticizer dispersion or uneven heat stabilizer distribution become immediately apparent during a
Multilayer co-extrusion casting film equipment
The HTCS-35C-01 is an experimental-grade multilayer co-extrusion casting film equipment manufactured by Hartek Technology Ltd. Features： Technical parameters of Multilayer co-extrusion casting film line The equipment HTCS-35C-01 is compatible with
Twin-screw hot melt extruder – Suzhou CMC Exhibition
The 8th CMC-CHINA Pharmaceutical Industry Expo will be held at the Suzhou International Expo Center from September 4th to 5th, 2026. Hartek has confirmed its participation, showcasing its HTGD-11 twin-screw
A Technical Guide to the Hartek Conical Twin-Screw Extruder
For researchers and compounders working with high-viscosity materials—rubbers, engineering resins, and bio-based polymers—the difference between a successful formulation and a failed experiment often comes down to three critical parameters: temperature
MT16 Benchtop Lab Film Extrusion Line
For polymer film researchers, the path from a promising new formulation to a production-ready product is rarely straightforward. You know the scenario all too well: a carefully developed formula that
Mastering Melt Spinning R&D Using the Single-Screw Spinning Line
For fiber material researchers, the journey from polymer pellets to consistent, high-quality filaments is rarely smooth. You have likely encountered the familiar frustrations: new formulations that break incessantly during spinning,
English 
Arabic 
German 
Spanish 
French 
Russian